Skip to content

Guest loyalty12 min read

Restaurant Coupons in a Loyalty Programme: Activation, Validity and Stacking

When the guest should apply a coupon and when the system should, how to set validity and limits, and in what order a coupon meets a privilege and points on one account.

Illustration: a guest's phone with a list of coupons and a highlighted free-dessert coupon, next to a receipt and a cup of coffee on a restaurant table
A coupon works when both the guest and staff know when it is valid and what it combines with.

A coupon is the most direct way to give a specific guest a specific reason to come: a free dessert until the end of the month, £5 off the next bill, a glass of wine with a birthday dinner. It is easier to understand than points, stamps or privileges, but it has a trap. When it isn't clear who activates it, until when it is valid and what happens when it meets another benefit on the same account, paying gets confusing and a discount is easily given twice. This guide is for owners and operations managers adding coupons to a loyalty programme. It covers which coupon types make sense, who should trigger a coupon, how to set validity and limits, and in what order a coupon meets a privilege and points.

A coupon is not a point, a stamp or a privilege

Loyalty programmes often mix several different things. Keep them apart when setting up coupons, because each answers a different question: how much have I collected, what do I get today, how many visits do I still need, what makes me special here?

Coupons compared with other loyalty mechanics

A coupon is one of the mechanics, not a replacement for the others.
MechanicWhat the guest getsWhen it makes sense
PointsValue from their spending to use laterRegulars who like collecting and watching their balance
Blanket discountThe same discount as everyone elseA short promotion for everyone, not tied to a specific guest
CouponA specific benefit with its own validity and rules, issued to themA reason to come in a given period or after a specific event
Stamp cardProgress towards a reward for repeat visitsCafés and bistros with frequent short visits
PrivilegeA longer-term benefit or status, such as a discount, a service or priorityRegulars, partners, special groups
Wallet cardA carrier for the loyalty account on the phone, not a benefit in itselfSo the guest has the card to hand and sees the account balance

The key difference is between a blanket discount and a coupon. A blanket discount applies to everyone who comes; a coupon belongs to a specific guest and has its own rules. In RestoCraft a coupon is always issued to a specific member of the loyalty programme, so it isn't a public code circulating on flyers or deal sites. That means less risk of misuse, but also that the guest has to be a member before receiving a coupon. How stamps and rewards fit together is a topic for a separate article on digital stamp cards.

Coupon types and when to use each

A coupon can carry a percentage discount, a fixed amount off, a free item or a custom benefit you describe yourself. Each type has different economics and tells the guest something different.

Percentage discount

It grows with the bill, so it suits encouraging a larger order: a group dinner, a tasting menu, a family lunch. On a large bill it can cost more than planned, so combine it with a minimum spend and issue it to guests you know why you're rewarding.

Fixed amount off

The guest knows exactly how much they'll save, and you know exactly what the coupon costs. With a minimum spend it works as a clear offer such as ‘£6 off a bill of £35 or more’. Without a minimum spend it can make up a large share of a small bill, so don't issue it that way.

Free item

A free dessert, coffee or glass of wine. The guest sees a gift, not a cheaper menu, and the restaurant bears the item's cost, not its menu price. It works well as an apology or a birthday present. Agree with the kitchen and bar which items qualify, so staff don't improvise when the dessert of the day has sold out.

Custom benefit

Anything that isn't a discount: a kitchen tour, a favourite window table, a tasting of the new menu. No till deducts it; staff provide it, so the coupon needs an exact description and a simple procedure for who provides it and when.

Activation: by the guest or by the system

For every coupon, decide who applies it. RestoCraft offers two modes: the guest activates the coupon before paying, or it is applied automatically when the loyalty card is scanned. The choice depends mainly on how many benefits a guest usually has and whether they want to save them.

Guest activation vs automatic application

You choose the mode for each coupon separately.
CriterionGuest activates before payingAutomatically when the card is scanned
Who decidesThe guest, in their loyalty account on the phoneThe system, according to the coupon settings
Fits whenThe guest has several benefits and picks the one that suits todayThe coupon is the only benefit and there's no point in saving it
Extra stepYes, the guest must activate the coupon before payingNo, the coupon is applied when the card is scanned
Typical riskThe guest forgets to activate it and wants the discount afterwardsThe coupon is used up when the guest would rather have kept it
What staff doWhen bringing the bill, ask whether the guest wants to use a couponTell the guest that the coupon has just been applied

If the guest activates the coupon, one simple rule applies: only one coupon can be active at a time. A guest can hold several coupons in their account but picks one before paying. Say so in the coupon text, so there is no debate at the table about why two can't be used at once.

On the floor, the guest opens their loyalty account through the QR code on the table, chooses a benefit in the coupons section and activates it. When staff or a connected till scan the card, the discount goes into the payment. The most common failure is timing, not the system: the guest remembers the coupon only after paying. So staff should ask one question when bringing the bill, not at the card terminal: ‘Do you have a coupon you'd like to use today?’ Guests see coupons in the same account as points and stamps, which can also go into the phone's wallet as a Wallet card.

Validity, minimum spend and a per-guest limit

A coupon in RestoCraft can have its own validity period, minimum spend and usage limits. These three settings decide whether the coupon brings the guest in when you want, and whether it costs you more than planned.

  • Validity sets the window in which the coupon works. A short one creates a reason to come soon; a longer one suits an apology or birthday coupon that needs a planned visit. Don't tie it to points expiry, or guests lose track of what expires when.
  • Minimum spend protects fixed discounts and free items on small bills. Base it on the typical spend of the guests who get the coupon, not the highest.
  • A per-guest limit says how many times one member can use the coupon. For welcome and apology coupons, a single use is sensible.

The rules of a coupon should fit in one sentence. ‘Free dessert with a bill of £25 or more, valid until the end of November, once per guest’ is something staff repeat without thinking. A coupon that needs a paragraph of exceptions ends in a dispute at the table, and that costs more than the coupon brings in.

Stacking benefits: what applies first

Most confusion arises when a guest has a coupon, a privilege and points on one account. Without a set order, staff improvise and every shift applies benefits differently. So when RestoCraft automatically proposes benefits to the till, it keeps a fixed order: coupon first, then the privilege, then points. Points are credited on the amount the guest actually paid, not the original bill, and if the programme uses a stamp card, the visit adds a stamp.

There are two privilege modes. An exclusive privilege on the same bill rules out both the coupon and paying with points, but the guest still earns points for the visit and a stamp. A combinable privilege is applied after the coupon, and points can then be used on the rest of the bill. How much of a bill can be paid with points is up to the restaurant: a maximum number of points or a percentage of the bill.

What applies when several benefits meet on one bill

Order for automatic proposals to a connected POS: coupon, privilege, points.
Situation on the billWhat appliesWhat the guest earns after paying
Coupon onlyThe coupon, then points up to the set limit if usedPoints on the amount paid, plus a stamp
Coupon and a combinable privilegeThe coupon, then the privilege, then points on the rest of the billPoints on the amount paid, plus a stamp
Coupon and an exclusive privilegeOnly the privilege; neither the coupon nor points are used on this billPoints for the visit, plus a stamp
Points onlyPoints up to the set limitPoints on the amount paid, plus a stamp

Automatic application assumes a connected POS. The connection is set up when the programme is introduced and depends on the venue's POS; check which systems can be connected during a consultation. A connected POS can deduct percentage and fixed discounts automatically; free items and custom benefits are provided by staff.

Who issues coupons and how to evaluate them

In RestoCraft today, the restaurant team issues coupons in the Loyalty admin, to a specific member of the programme. A typical case is an apology: a guest gives a low rating through the QR menu, a case opens in ReviewHub (if that feature is switched on), the manager resolves it with the guest and manually issues a coupon, points or a privilege in Loyalty. A benefit recorded on the ReviewHub case is only a record for now; the benefit itself has to be issued in Loyalty.

Automatic coupon issuing in scenarios such as birthdays or a guest who hasn't visited for a long time is in development in RestoCraft and runs only in pilot. If you send coupons to guests by e-mail, that is marketing communication, for which you need consent or another legal basis; rules differ by country, so check with an advisor. Registration, service and marketing messages are compared in a separate article on automated communication after a visit.

Loyalty analytics in RestoCraft are still in development and don't show the number of coupons issued and used; the programme overview today shows the numbers of active members, rewards and privileges. Until then, evaluate coupons simply: for each campaign note the goal, the coupon type, the validity and the number issued, and after it expires add how many were redeemed according to the till's discount report and what they cost.

The most common mistakes repeat in most venues:

  • a coupon without a clear end date, which a guest redeems six months later;
  • two benefits on one bill without a rule for which takes priority;
  • a coupon for an item that isn't on the menu that day;
  • staff who don't know about the coupon, and a guest who has to explain it;
  • coupons instead of a whole programme, so guests only come with a discount.

The last mistake is the most expensive, because it teaches guests to wait for the next discount. For other common reasons a programme stops working, see our article on why a restaurant loyalty programme isn't working.

Frequently asked questions

Yes. A guest can hold several coupons in their loyalty account. If a coupon requires activation by the guest, only one can be active at a time, so the guest chooses before paying which one to use today.

Coupons in RestoCraft are issued to a specific member of the loyalty programme. Offer a new guest registration first, perhaps with a welcome bonus you can switch on in the programme, and issue the coupon once they are a member.

Yes, on the amount paid. Points are calculated on what the guest actually paid after the coupon, privilege and points were applied, not on the original bill.

There is no fixed rule. A coupon meant to bring guests in during a particular period needs a shorter validity; an apology or birthday coupon a longer one. More important than the length is that the guest knows the end date and staff can repeat it.

Key takeaways

  1. A coupon is a benefit for a specific member with its own validity, not a blanket discount.

  2. Choose the coupon type by its cost to the restaurant, not just its value to the guest.

  3. Guest activation suits guests with several benefits; only one coupon is ever active.

  4. Validity, minimum spend and a per-guest limit belong to every coupon.

  5. The order on a connected POS is fixed: coupon, privilege, points.

  6. Points are credited on the amount paid.

Conclusion

A well-set coupon is a short, clear offer for a specific guest: they know what they get, until when and what it doesn't combine with. Before you issue the first one, decide on the type, activation, validity and limits, and write down the rules for combining it with privileges and points. Then brief the staff and record the result of every campaign. That way the coupon stays a reason to visit, not another discount guests get used to.

RestoCraft Loyalty

Coupons, points and privileges in one loyalty account

See how RestoCraft Loyalty handles coupons for specific members, activation before payment and the order of benefits on a connected POS.